Thermal Products

Are a range of high-performance liquid products designed for the control of scaling and particulate fouling in thermal seawater MSF/MED distillation plants.
All products are available in 230kg Drums or 1100kg IBC.

Effective for control of calcium carbonate, magnesium hydroxide and calcium hydroxide scaling at the high-Top Brine Temperatures (TBT) currently in use.
It is particularly recommended for use in plants operating at top brine temperatures higher than 100 ℃, where total control of particulate fouling and sludging is critical to maintaining thermal efficiency.
It has excellent dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability.
Certified to NSF/ANCI/CAN 60 for use in distillation plants producing potable water.

Is a neutralized product with a pH of 7.7~8.3 and is therefore suitable for use in non-stainless-steel dosing systems.
Effective for control of calcium carbonate, magnesium hydroxide and calcium hydroxide scaling at the higher Top Brine Temperatures (>100°C) currently in use.
It is particularly recommended for use in plants operating at top brine temperatures higher than 100 ℃, where total control of particulate fouling and sludging is critical to maintaining thermal efficiency.
Certified to NSF/ANCI/CAN 60 for use in distillation plants producing potable water.

Premium specialist product for use in MED thermal desalination systems
Excellent dispersant performance and is effective for control of calcium carbonate, magnesium hydroxide and calcium hydroxide scaling
It is particularly recommended for use in plants operating at top brine temperatures higher than 100 ℃, where total control of particulate fouling and sludging is critical to maintaining thermal efficiency.
Certified to NSF/ANCI/CAN 60 for use in distillation plants producing potable water.

High‐Performance Liquid Product Formulated to Control Foaming and Priming in Seawater Distillation Plants.
Fully miscible in water and Non-Flammable.
Stable under the conditions of standard industry practices for use concentrations (0.05 – 0.2 mg/l),
Approved by NSF/ANCI/CAN 60.
The Maximum Use Level (MUL) is 0.5 ppm (mg\L).

+966 12 605-8546

www.usci.com.sa

info@usci.com.sa